Traveling Column Horizontal Machining Center

horizontal_machining_centers
TC-40H

TC-H Series

Horizontal Traveling Column Design

  • Fixed table features high load capacity
  • Large X axis travel to 320"
  • Z axis travel of 24" or 32"
  • Fast set-up and operation

TC-40H

40" x 29" x 26"
 

TC-80H

80" x 24" x 24" (32")
 

TC-120H

120" x 24" x 24" (32")

TC-160H

160" x 24" x 24" (32")
 

TC-240H

240" x 24" x 24" (32")
 

TC-320H

320" x 24" x 24" (32")

REQUEST INFO

Overview

The Fryer TC-H Series features a fixed table and traveling column design. It is equipped with a rugged 50 taper horizontal spindle featuring a high torque 40 HP spindle motor with 350 ft/lbs of torque. The fixed table allows table loads of more than 10,000 lbs. while offering versatility in part fixturing. Available in sizes ranging from 40" X travel all the way to huge 320" travel machine.

FEATURES

  • Innovative traveling column design
  • 40" to 320" X travel
  • Z travel of 24" or 32"
  • 40 HP 50 taper spindle
  • 1,000 IPM rapid feedrate
  • 24 or 40 tool ATC

PRODUCTIVITY

  • Fixed table with over 10,000 lbs. capacity
  • Available built-in rotary table
  • Simple menu or G code programming
  • Fast set-up keys
  • Open style semi-guarding or fully enclosed
  • Siemens or Fanuc CNC
Previous Next

CNC Control

Overview

The Fryer / Siemens 828-HS control is designed for ease of use in low volume toolroom and job shop facilities. Simple menu programming and fast set-up keys allow you make one-off parts in half the time of a manual machine. Multi mode operation allows you to use the machine manually, semi-automatic and full CNC mode. Canned cycles and graphic verify make set-up faster and easier.
cnc_control
 
FRYER-SIEMENS 828-HS CNC
  • Manual or CNC
  • Do-one mode
  • Teach mode
  • Conversational mode
TECHNOLOGY
  • Ultra reliable Siemens High Speed all digital control system
  • Regenerative drives save 40% electrical use
  • Digital drives provide better accuracy and surface finish
  • Absolute encoders never require you to ‘home’ machine
 
Geometry Creator
Enter part dimensions using the Simple Geometry Creator. The dimensions are drawn on the screen while you enter them and missing information is automatically calculated.
cnc_control
Pocketing Cycles
Choose from a wide variety of pocket shapes. Then answer basic questions about the depth of cut, tool type and finish stock allowance.
cnc_control
 
Drilling Cycles
Choose from a wide variety of drill cycles including drill, deep hole drill, peck drill, bore, rigid tap, rigid peck tap and more.
cnc_control
3D Graphic Simulation
The 828-HS uses sophisticated solid model graphic verification to accurately show what your part will look like BEFORE you cut it. Also choose from wireframe or multiview screen.
cnc_control
Please download our CNC Control brochure for more detailed information.
 
Previous Next

欧美人与动欧交视频_老熟女激烈的高潮_老湿机69福利区无码